AP660 Automatic Inline Stencil Printer

AP660 Automatic Inline Stencil Printer
AP660 Automatic Inline Stencil Printer
AP660 Automatic Inline Stencil Printer
AP660 Automatic Inline Stencil Printer Electronics Compartment
AP660 Automatic Inline Stencil Printer Motor
AP660 Automatic Inline Stencil Printer Inlet
AP660 Automatic Inline Stencil Printer Ports
AP660 Automatic Inline Stencil Printer Understencil Wiper
AP660 Automatic Inline Stencil Printer Stop/Go
AP660 Automatic Inline Stencil Printer Front Pressure Gauge
AP660 Automatic Inline Stencil Printer Rear Pressure Gauge
AP660 Automatic Inline Stencil Printer Shown with PCB
AP660 Automatic Inline Stencil Printer Shown with Stencil
AP660 Automatic Inline Stencil Printer
AP660 Automatic Inline Stencil Printer
AP660 Automatic Inline Stencil Printer
AP660 Automatic Inline Stencil Printer
AP660 Automatic Inline Stencil Printer
AP660 Automatic Inline Stencil Printer Tooling

AP660 Automatic Inline Stencil Printer

Manncorp’s AP660 is a high-precision, fully automatic SMT stencil printer with a print area from 50 X 50 to 600 x 600 mm. Top quality prints are guaranteed with the 4-point ball screw drive and programmable speed control for both the blades and stencil-PCB separation. High-performance cameras in the AP660 allow for fast PCB alignment and fine pitch printing.

Regular price $109,995.00
/
QUESTIONS? TEXT OR CALL:
Chris Ellis  215-869-8374 | East Coast
Ed Stone 215-808-6266 | West Coast

Fast, Easy Job Changeover

The AP660, which accommodates stencils from 680 x 300 mm to 900 x 900 mm, makes job set-up simple: input the stencil size, insert the stencil into the frame clamp until it reaches the stopper, and the system software will handle the rest. Be ready for the next production assignment in a matter of seconds.

Fully Programmable

The Windows-based AP660 is easy to program, allowing the printer to be up and running quickly after install. All parameters, including print speed (programmable from 10 to 120 mm/s), stroke length, squeegee pressure, etc., are fully programmable via the graphical user interface. During operation, all details, including process status of the current job, are displayed on screen. 

Increased Throughput

The AP660's dual-squeegee system is controlled by high-precision ball-screw drives with a programmable print speed. Print pressure is uniformly and accurately controlled. Self-leveling squeegees automatically adjust to the stencil surface to ensure perfect registration on every print.

SMEMA-Compatible

The efficient single-stage PCB transport system is SMEMA-compatible to interact with the other manufacturing equipment in your production line.

Integrated Under-Stencil Wiping

Automatic wet/dry/vacuum under-stencil cleaning is included with the AP660. The system can be programmed to clean the stencil using any combination of dry wipe, wipe with solvent ("wet wiping"), or wipe combined with a vacuum to draw out material from the apertures. Manncorp recommends using Zestron Vigon SC200 for cleaning solution.

AP660 Specifications
Printing Speed10 to 120 mm/s (servo controlled)
Vision Alignment SystemAutomatic (AT-Align system)
Stencil Frame Size (External Dimensions)680 x 300 mm to 900 x 900 mm
(26.7" x 11.8" to 35" x 35")
Board SizeMin: 50 x 50 mm
Max: 600 x 600 mm
Board Thickness0.4 to 5 mm
Board WarpageMax PCB 1% of diagonal line
Blade TypeMetal
XY Adjustment±10 mm
Radial Adjustment±2°
Registration Repeatability±0.01 mm
PCB FixationScrew clamping system and vacuum
CCD FOV5 x 7 mm
Vision FiducialStandard fiducial and any pads, 0.5 to 3 mm
Air & Power Requirements220VAC 50-60 Hz power, 75psi (5 bar) air
Dimensions (L x W x H)74.8" x 59.2" x 61" (1900 x 1506 x 1550 mm)
Weight1852 lbs (840 kg)

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

More from Equipment
Ultra-Dry 1490V Desiccant Dry Cabinet
  • Capacity: 44.1 cu. ft.
  • Datalogging-Capable
  • 5 Adjustable Shelves
$10,995.00
2000PC Automatic SMD Parts Counter - PocketCheck Counter
  • Speed up inventory & kitting tasks
  • Includes PocketCheck missing part detection
  • Ideal for inventory, intake counts, pre-kitting etc.
$2,695.00
Inspection and Linking Conveyor
  • 5 Standard Length Options: 500-1200 mm
  • Custom lengths available
  • Equipment linking, inspection & buffering
from $4,295.00
2000 Automatic SMD Component Counter
  • Speed up inventory & kitting tasks
  • Double-check feature
  • Ideal for inventory, intake counts, pre-kitting etc.
$2,295.00
Ultra-Dry 790V Desiccator Cabinet
  • Capacity: 22 cu. ft.
  • Datalogging-Capable
  • 5 Adjustable Shelves
$8,495.00