SMT Place 2000 Manual Pick & Place

SMT Place 2000 Manual SMT Pick & Place from Manncorp
SMT Place 2000 Manual SMT Pick & Place - Front View
SMT Place 2000 Manual SMT Pick & Place
SMT Place 2000 Manual SMT Pick & Place - Right Side View
SMT Place 2000 Manual SMT Pick & Place - Rear View
SMT Place 2000 Manual SMT Pick & Place - Left Side View
SMT Place 2000 Tape Feeders and Cut Strip Feeders
SMT Place 2000 Built-In Dispensing
SMT Place 2000 Placement Head
SMT Place 2000 Placing Component on PCB
SMT Place 2000 Picking Up Component from Loose Parts Carousel
SMT Place 2000 Manual SMT Pick & Place

SMT Place 2000 Manual Pick & Place

Speed Up Manual Assembly & Increase Product Quality

Desktop-sized and easy-to-use; Manncorp's SMT Place 2000 handles a wide range of manual pick & place jobs with more accuracy and greater speed than tweezer assembly can accomplish—and will cause much less operator fatigue.

Our customers rely on the SMT Place 2000 for:

  • Prototype circuit assemblies
  • Engineering & design changes
  • Small batch/low-volume assembly

Includes an integrated paste & adhesive dispenser, loose parts carousel, and feeder base. Feeders (8mm & 12mm) and a cut strip holder can be purchased for taped parts.

This item ships by freight. If you purchase it through our online store, our sales team will send you a quote for the freight costs after purchase.

Regular price $6,995.00
/
QUESTIONS? TEXT OR CALL:
Chris Ellis  215-869-8374 | East Coast
Ed Stone 215-808-6266 | West Coast

Fast, Simple, Manual Electronics Assembly

With its easy-gliding head (which rotates up to 360°), the SMT Place 2000 is more accurate and efficient than placing components by hand. The control knob, located right on the head, makes adjusting component polarity and alignment-to-pad effortless.

Simply touching down on a component from a tape feeder or one of the unit's loose parts bins will activate the vacuum, picking up the part. Then, touching down onto the PCB will shut off the vacuum, placing the part. The pressure is fully adjustable and placement nozzles are easy to change out.

Minimize Mistakes, Ward Off Fatigue

To reduce fatigue and improve steadiness, the SMT Place 2000's armrest slides to support the operator's hand above the board during assembly. This allows more assemblies to be completed with increased accuracy over time than could otherwise be accomplished. It also keeps the operator's sleeve out of the way, preventing accidental disruption of solder paste smear or already-placed components.

No Stencils Needed

The SMT Place 2000's integrated dispense system lays down solder paste without the use of a stencil. Built-in time/pressure dispensers handle both solder paste and adhesives, with a syringe vacuum control feature that can be adjusted to prevent low-viscosity liquids from dripping out. Dots are placed using the foot pedal. "Repeat" mode allows the dispenser to continue distributing dots as long as the foot pedal is pressed (the dot interval is set using the repeat time regulator). Both dispense time and dispense pressure are fully adjustable.

SMT Place 2000 Specifications
Placement AccuracyManual
Placement Rateup to 800 pph
ComponentsOperator Dependant
Component Heighttop max 0.79" (20 mm), bottom 0.98" (25 mm)
Board Sizemax 11" x 8.7" (280 x 220 mm)
Board Thickness0.02" (0.5 mm), max 0.12" (3.0 mm)
Maximum Warpage0.04" (1 mm) up, 0.04" (1 mm) down
Loose PartsESD-safe 45-bin rotating loose parts
carousel with cover included
Taped PartsBuilt-in feeder base holds up to 12 tape feeders or a
combination of tape feeders and tape strip feeders. Tape strip
feeders hold 8 mm, 12 mm, and 16 mm strips.
Power Requirement110VAC, 50-60Hz, 70W
Air Requirement85psi
Dimensions35.4" x 30" x 11.8" (900 x 760 x 300 mm)
Weight55 lbs (25 kg) without feeders

SMT Place 2000 Manual Pick and Place Machine Features

  • X/Y guiding system and rotating head for precise positioning
  • Component displacement and paste smear is prevented by built-in armrest
  • Lightweight pick & place head and sliding armrest reduce operator fatigue
  • Vacuum automatically turns on when the nozzle touches the component and turns off at placement, saving steps
  • Magnetic support blocks for fast changeovers
  • Odd-shaped and double-sided PCBs easily accommodated
  • ESD-safe 45-bin loose parts carousel included
  • Built-in feeder base, no need to purchase separately
  • Holds twelve 8 mm and/or 12 mm tape feeders
  • Cut strip holder for three 8 mm, one 12 mm and one 16 mm tape strips—ideal for prototyping and other jobs where components are purchased only in quantities needed, instead of full reels
  • Integrated dispense head eliminates costly stencils

SMT Place 2000 includes:

  • Manual pick & place/SMT assembly station
  • 360˚ rotating placement head
  • Auto on/off vacuum pressure
  • Magnetic PCB blocks
  • Sliding arm rest
  • Loose parts carousel with 45 trays
  • Integrated feeder base
  • Integrated time/pressure dispenser

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

More from Equipment
SpotCheck™ SMD Quick-Count Estimator
  • Estimate the count of reeled SMDs
  • Less than 60 seconds
  • Use without interrupting production
$349.00
Ultra-Dry 1490V Desiccant Dry Cabinet
  • Capacity: 44.1 cu. ft.
  • Datalogging-Capable
  • 5 Adjustable Shelves
$10,495.00
2000 Automatic SMD Component Counter
  • Speed up inventory & kitting tasks
  • Double-check feature
  • Ideal for inventory, intake counts, pre-kitting etc.
$2,295.00
Inspection and Linking Conveyor
  • 5 Standard Length Options: 500-1200 mm
  • Custom lengths available
  • Equipment linking, inspection & buffering
from $3,795.00
MC301 Benchtop Batch Reflow Oven
  • Soldering Area: 250 mm x 200 mm
  • Preheat, Soak, Reflow, & Cooling
  • Size: 29.2” L x 23.75” W x 12.5” H
$7,495.00
2000PC PRO Automatic SMD Counter - PocketCheck with Barcode Reader and Printer
  • Speed up inventory & kitting tasks
  • Includes PocketCheck missing part detection
  • Plus, bar code scanner and label printer
$4,095.00