Unmatched Placement Versatility and Speed with 6, 8, or 10-Head Precision

The MC889 is engineered for exceptional flexibility, speed, and precision—making it an ideal solution for high-mix, high-volume production. Its high-speed gantry achieves placement rates of up to 20,000 components per hour (CPH), 18,800 CPH (IPC 9850) while maintaining 30 µm (3 Sigma) placement accuracy. Capable of handling components from ultra-miniature 01005 to large and complex parts up to 100 x 150 mm, the MC889 is built to accommodate everything from passive chips to oversized connectors and modules with ease.

Advanced dual-vision alignment combines head-mounted Cognex^® on-the-fly cameras with a stationary upward-looking camera to ensure highly accurate placement across a wide variety of component types. From BGAs, µBGAs, CSPs, and MLFs to fine-pitch QFPs down to 0.3 mm (0.012") and odd-form components, the system's full-vision alignment ensures leads, balls, or bumps match precisely with PCB pads. This high-accuracy capability eliminates body-centered errors and delivers consistently reliable results for today's dense, complex board designs.

Flexible Feeder Capacity for High-Mix Efficiency

The MC889 is configured exclusively for inline operation with 96 feeder ports, making it an ideal solution for high-mix, quick-turn production lines. In this standard setup, two 48-port feeder racks are mounted on the front and rear of the machine, supporting Smart Tape feeders and Stick feeders. This configuration is fully compatible with a 3-stage SMEMA inline conveyor system, enabling seamless integration into automated workflows and ensuring fast changeovers and continuous operation for both mid- and high-volume production.

With a generous placement area of up to 650 mm x 460 mm (25.6" x 18.1"), the MC889 accommodates flexible component presentation, including waffle trays, bulk part trays, and cut strip tape holders—helping operators quickly transition between jobs and minimize setup time. Whether assembling complex boards or handling diverse production runs, the MC889 combines high feeder capacity, wide component support, and streamlined operation to meet the needs of modern SMT environments.

Smart Features for Faster, Smarter SMT Production

Engineered for high-volume environments, the MC889 streamlines even the most complex SMT processes to maximize speed and efficiency. Its intelligent software automatically optimizes feeder placement to reduce head travel and tool changes, ensuring consistently high throughput with minimal downtime. Quick-change Smart Feeders—both tape and stick—connect easily and are production-ready within moments. Electronic tape feeders provide reliable, smooth indexing, while adjustable stick feeders accommodate a wide range of components and package styles. For small or partial quantities, cut strip holders offer an efficient solution that reduces material waste and lowers costs.

To further accelerate job preparation and boost accuracy, the MC889 supports offline feeder programming and barcode scanner integration. This enables fast, error-free job setup by minimizing manual data entry and ensuring the right parts are in the right place—every time. Together, these smart features make the MC889 a powerful tool for high-mix, high-volume production environments where speed, reliability, and flexibility are essential.

Engineered for Reliability and Repeatability

When consistent results are critical—for in-house builds or customer assemblies—the MC889 delivers with unmatched mechanical integrity and precision. Its robust, welded steel frame anchors a high-precision ball-screw drive system, advanced AC servo motors, and non-contact rotary encoders. This combination ensures smooth, controlled motion and high repeatability, even at maximum production speeds, maintaining accuracy across the most demanding SMT applications.

The MC889 is more than just a high-performance machine—it's a long-term investment in production reliability. Backed by a Manncorp standard one-year warranty and equipped with built-in remote diagnostics, it provides quick access to expert support when needed. From its durable construction to its intelligent support features, the MC889 offers lasting value, performance you can count on, and the peace of mind that comes with dependable, production-ready design.

User-Friendly, Field-Tested Software Built for Efficiency

The MC889 operates on the same robust, Windows^®-based software platform used across the entire MC Series—refined through over a decade of real-world customer feedback. Designed for reliability and ease of use, it supports programming via CAD import and conversion, manual teaching, or direct entry. After importing CAD data, users follow intuitive setup steps to configure PCB layout, assign feeders, and define component placements, streamlining job setup. Component data integrates seamlessly with the Smart Feeder system, simplifying inventory control and production preparation. A built-in virtual PCB simulator visually confirms the assembly for fast, accurate verification before the first board is placed.

During production, the interface provides real-time monitoring of pick camera images, production speed, run time, task lists, and PCB status. The system tracks component placement in real time, allowing seamless recovery after interruptions by resuming exactly where it left off. Operators can adjust feeder settings, placement data, or machine speed on the fly—without leaving the production window—ensuring uninterrupted operation, minimized downtime, and maximum productivity.

Smart Feeder Integration for Reliable Assembly

Every MC Series pick and place machine includes fully integrated smart feeder management and control software—built into the system from the ground up to enhance reliability, streamline efficiency, and ensure traceability throughout production. Each smart tape feeder features a DB-9 interface connector that plugs into any MC Series smart feeder base, enabling direct communication between the feeder and the machine’s software. A built-in memory module stores a unique feeder ID and essential component data, such as assigned port, feeder size and type, component value, lot and date codes, starting quantity, index increments, and package type.

To simplify job setup even further, an optional barcode reader can scan the part code on a reel and automatically upload all relevant information into the feeder. This eliminates manual data entry, reduces setup time, and prevents errors. Once connected, the system instantly applies the correct parameters, ensuring the right parts are always placed in the right positions. This seamless hardware-software integration allows MC Series machines to maintain consistently high assembly accuracy and efficiency, run after run.

New Innovative Feeder with Built-In OLED Display – KFTA3D Series

This next-generation smart feeder features an integrated OLED display and internal memory that continuously stores and updates key component information. Operators can instantly view reel quantities, feeder slot locations, part numbers, and part values whether the machine is running or offline. With real-time data visible directly on the feeder, setup becomes faster, more accurate, and less error prone. This added layer of visibility ensures the right components are loaded correctly from the start, preventing costly mistakes before they reach the inspection stage.

An internal battery ensures that stored data remains accessible even when the feeder is disconnected from the machine. Whether you’re tracking part usage during production or verifying setup offline, the system provides a consistent and reliable overview of component consumption. Additionally, these feeders are designed for efficient use of rack space; a 12 mm feeder only occupies a single slot, allowing for higher feeder density and greater flexibility during job setups. By shifting critical data access to the point of use, these smart feeders significantly improve both traceability and productivity in any high-mix SMT environment.

Universal Smart Stick Feeders for Maximum Flexibility

Manncorp’s smart stick feeders offer seamless integration with MC Series pick and place machines and can be positioned directly alongside smart tape feeders for efficient use of feeder rack space. Available in 5, 10, or 20-lane configurations, these feeders provide the flexibility needed for a wide range of component types and production requirements.

Using DB-9 interface connectors, each feeder communicates directly with the system software through the smart feeder base. Built-in memory modules store unique ID numbers that link each lane to its specific feeder position and associated data, including component specifications, belt indexing increments, and precise on/off timing for the vibratory mechanism. This intelligent design ensures accurate, consistent part delivery while simplifying setup and minimizing the risk of operator error.

Flexible Tray and Cut Tape Handling for MC Series Machines

MC Series pick and place machines feature spacious, open work areas designed to accommodate a variety of component presentation methods, including waffle trays and cut tape strips, for maximum flexibility during production.

The TS-1 Waffle Tray Holder occupies approximately 13” x 5.5” (330 mm x 140 mm) of the work area and is designed to securely hold a standard 12.4” x 5.35” (316 mm x 136 mm) JEDEC matrix tray—or up to two cut strip tape holders. Its adjustable design supports a wide range of smaller matrix tray and waffle pack combinations and can easily be modified for custom tray configurations as needed.

For low-quality components or those supplied in short tape lengths, CST Cut Strip Tape holders offer a practical solution. These holders allow operators to present components that are not long enough to be used with standard tape feeders, helping reduce waste and improve efficiency. Standard holders are available for 8 mm, 12 mm, 16 mm, and 24 mm tape widths, with additional sizes available upon request.

Smart Feeder Software: Seamless Setup, Tracking, and Changeover

Included as standard on all MC Series pick and place machines, Manncorp’s advanced smart feeder software simplifies and accelerates production with intelligent features that reduce setup time and eliminate manual data entry. From automatic quantity tracking to feeder position verification, the system ensures accurate, repeatable results across both short runs and high-volume jobs.

One of the key capabilities is automatic component quantity tracking. During production, the software continuously monitors component usage and updates each feeder’s onboard memory with the quantity remaining on the reel. This data is retained even after the feeder is removed. When reloaded—even for a different job—the feeder automatically communicates its remaining part count to the assembly program, allowing production to resume without recalibration or manual input.

Feeder position verification ensures components are being pulled from the correct locations. When optimized feeder positions are used, the machine compares smart feeder IDs with predefined slot data to confirm correct placement. If optimized positions are not used, the system can perform position scanning, identifying each feeder’s location automatically and mapping it to the corresponding pick-up point in the assembly file for fast, error-free changeovers.

To support flexible production environments, quick-change feeder location functionality allows operators to move feeders to new slots or maintain the same layout across consecutive runs without editing the pick and place program manually. For even greater convenience, an optional barcode reader can capture component data such as part value, lot code, date code, and starting quantity directly from packaging—cutting out time-consuming manual entry and reducing the risk of data entry errors.

Smart Tape Feeder Carts for Secure Storage and Off-Line Kitting

Safely transport, store, and organize your Smart Tape Feeders with Manncorp’s durable, dual-tiered Smart Tape Feeder Storage Cart. The FR-ST64 model (pictured) holds up to 64 individual 8 mm Smart Tape Feeders, making it ideal for off-line kitting and streamlined production preparation. Designed for mobility, the cart moves easily from the kitting area to the production line, helping operators stage feeders in advance for faster setup and changeover.

Built with heavy-duty tubular steel construction, the cart holds each feeder securely in place while protecting against bumps and impact during transport. Whether you’re preparing for a high-mix production run or simply looking to keep your feeders organized and damage-free, the FR-ST64 is a reliable, space-saving solution for any SMT operation.

Automatic Index Adjustment to Eliminate Pickup Errors

MC Series pick and place machines feature automatic index adjustment using vision-board alignment. When a new reel is loaded into a feeder, the machine can detect slight offsets in tape pocket position and automatically advance or reverse the feeder to correct it—ensuring accurate component pickup from the start. This is especially valuable when switching reels, as minor misalignments between tapes can lead to placement errors. For reels with looser tolerances, the system can be set to verify alignment and adjust indexing on every pickup, preventing recurring errors and maintaining consistent, reliable performance.