Fast, simple manual placement
SMT Place 2000's X/Y guiding system and easy-gliding pick & place head is more accurate and efficient than component placement is possible by hand. The head rotates up to 360°, with the control located right on the head, for quick adjustment of component polarity and alignment to pad. Once the component is lowered to the PCB, vacuum automatically shuts off, releasing the part. Vacuum pressure is fully adjustable. Placement nozzles are quick and easy to change out.
Minimize mistakes, ward off fatigue
The SMT Place 2000's armrest slides to support the operator's hand above the board during assembly, which both steadies the operator's arm and minimizes fatigue, allowing more assemblies to be completed more accurately over time than could be accomplished with hand assembly.
It also prevents the operator's sleeve cuff smearing solder paste on the PCB or disturbing already-placed components.
Eliminate costly stencils
For prototyping, small jobs and frequent job/design changes, SMT Place 2000's integrated dispense system can eliminate the expense of stencils. The built-in time/pressure dispenser handles both solder paste and adhesives, with a syringe vacuum control feature that can be adjusted to prevent low-viscosity liquids from dripping out of the syringe. Dots are placed using the foot pedal. Repeat mode allows the dispenser to continue distributing dots as long as the foot pedal is pressed, the dot interval is set using the repeat time regulator. Both dispense time and dispense pressure are fully adjustable.
SMT Place 2000 Manual Pick And Place Machine Features
- X/Y guiding system and rotating head for precise positioning
- Component displacement and paste smear is prevented by built-in armrest
- Lightweight pick & place head and sliding armrest reduce operator fatigue
- Vacuum automatically turns on when the nozzle touches the component and turns off at placement, saving steps
- Magnetic support blocks for fast changeovers
- Odd-shaped and double-sided PCBs easily accommodated
- ESD-safe 45-bin loose parts carousel included
- Built-in feeder base, no need to purchase separately
- Holds twelve 8 mm and/or 12 mm tape feeders
- Cut strip holder for three 8 mm, one 12 mm and one 16 mm tape strips—ideal for prototyping and other jobs where components are purchased only in quantities needed, instead of full reels
- Integrated dispense head eliminates costly stencils
| SMT Place 2000 - Specifications |
|---|
| Placement Accuracy |
Manual |
| Placement Rate |
up to 800pph |
| Components |
Operator Dependant |
| Component Height |
top max 0.79" (20mm), bottom 0.98" (25mm) |
| Board Size |
max 11" x 8.7" (280 x 220mm) |
| Board Thickness |
0.02" (0.5mm), max 0.12" (3.0mm) |
| Maximum Warpage |
0.04" (1mm) up, 0.04" (1mm) down |
| Loose Parts |
ESD-safe 45-bin rotating loose parts carousel with cover included |
| Taped Parts |
Built-in feeder base holds up to 12 tape feeders or a combination of tape feeders and tape strip feeders. Tape strip feeders hold 8 mm, 12 mm, and 16 mm strips. |
| Power Requirement |
110Vac, 50-60Hz, 70W |
| Air Requirement |
85psi |
| Dimensions |
35.4" x 30" x 11.8" (900 x 760 x 300mm) |
| Weight |
55lbs (25kg) without feeders |
SMT Place 2000 includes:
- Manual pick & place/SMT assembly station
- 360˚ rotating placement head
- Auto on/off vacuum pressure
- Magnetic PCB blocks
- Sliding arm rest
- Loose parts carousel with 45 trays
- Integrated feeder base
- Integrated time/pressure dispenser
Submitting Form Data
