Trident LDO Low-Discharge PCB Cleaner

The fully automatic Trident LDO defluxing system removes all post-reflow flux and solder paste residues along with other contaminants and particulates from printed circuit board assemblies (PCBAs), and it does so at a cost savings: its built-in wash-solution-reuse system reduces cleaning chemistry costs by as much as 95% while its fast cycle time gets more assemblies cleaned, tested, and dried per shift than any other automated defluxing system. Trident LDO is a low-discharge system. Wash solution is automatically captured and reused, limiting effluent discharges to only the rinse water. A built-in pre-drain filtration system filters rinse water automatically. (For zero-discharge, add the optional EcoCycler rinse water recycling system, or see the Trident ZDO zero-discharge PCB defluxing system). 

Requires Account Log-In or Sign-Up

QUESTIONS? TEXT OR CALL

Chris Ellis 215-869-8374
EAST COAST
Ed Stone 215-808-6266
WEST COAST
PRINT
TRI-ABR:
Additional Adjustable ESD-Safe Board Rack + $1595.00
20270:
Dual Rack Assembly Upgrade from Pre-Plumbing (price per chamber) + $4220.00
20046:
3-Status Light Bar for Trident ECO/LDO/CLO (price per chamber) + $595.00
20385:
Upper Board Rack Pre-Plumbing for Trident (price per chamber) + $750.00
20506:
Sump Tank Sampling Port for Trident + $1520.00
20763:
Middle Spray Bar Assembly (price per chamber) + $1795.00
C1035:
Windows 7 Ultimate Upgrade (price per chamber) + $708.00
20042:
Spray Pump Variable Speed Controller for 208-240 VAC Trident Models + $2095.00
20043:
Spray Pump Variable Speed Controller for 400 VAC Trident Models + $2095.00
20003:
Chemical Management System Upgrade for Trident LDO/ZDO + $3750.00
A1325:
Containment Tray for Trident LDO/ECO + $1375.00
TRICTW:
Containment Tray with Casters for Trident LDO/ECO + $1815.00
A1036:
Containment Tray for Trident ZDO + $1775.00
A1421-C:
Containment Tray with Casters for Trident ZDO + $2645.00
20766:
Caster Set (4 Lockable) for Trident ZDO + $765.00
10735:
Filters, 20 Micron, Case of 10 + $305.00
20007:
Inline Wash Solution Filtration System for Trident (price per chamber) + $1375.00
10027:
Handheld Digital Refractometer + $847.00
30309:
Bar Code Scanner for Trident (price per chamber) + $690.00
10732:
Chamber Support Bracket for Dense Batch Applications (price per chamber) + $279.00
UL Cert-Inspect:
UL 61010-1 Certification & Inspection for Trident + $5500.00
1-3TANKS:
One 1.3 cubic foot carbon tank and One 1.3 cubic foot resin tank with hoses and fittings + $1500.00
SZ001:
Seismic Tie-Down System + $315.00
INSTL&TRN:
Installation and Training + $3500.00

Predictive Cleanliness Capability

Trident LDO's on-board cleanliness tester continuously monitors cleanliness levels in real-time and controls the cleaning process automatically, ensuring cleaned circuit boards meet or exceed programmed settings, board after board, for the most consistent cleanliness levels possible.

Purpose-Built for Printed Circuit Board Assembly

Trident LDO is specifically designed to clean and deflux post-reflow PCBs, including densely populated boards or assemblies using low-standoff surface mount (SMT) components. This is accomplished through the use of Trident's asymmetrical fan-jet spray system, which directs precision-diffused wash solution and rinse water to a concentrated area, resulting in greater impingement and improved under-component penetration while the oscillating board rack reduces shadowing effects.

Trident systems are uniquely capable of removing all eutectic (SnPb) and lead-free solder residues, either separately or mixed in the same batch. They remove all flux types, including water soluble, rosin and no clean, from SMT, through-hole and mixed-technology assemblies, as well as board and component fabrication residue and contaminants picked up during assembly.

Easy Operation & Maintenance

Trident's automatic chemical management system automatically doses and mixes defluxing chemicals, eliminating the need to manually measure, mix or handle chemicals.

Estimated completion time, cleanliness values and operating temperatures are displayed in real time on screen. Gauges on the machine indicate water line, spray manifold and pre-drain filter pressures. The wash solution includes a level gauge with a low-level alarm. The concentrated wash solution holding tank also includes a fluid level gauge.

Maintenance reminder software displays the number of times each has been used. The counters turn red when the administrator-specified number of cycles has been reached.

Statistical Process Control (SPC) for Traceability and Tracking

Trident LDO's SPC data recording automatically tracks alpha-numeric cleaning program names, process times and temperatures, set and actual cleanliness levels, and other valuable data. SPC data can be viewed on screen, sent to a networked printer, or export to USB or another computer via network protocols.

Trident LDO Specifications
Dimensions 42 ¼" L x 47 ¾" D x 70" H
Weight 791 lbs
Power Requirements 208-240 VAC 40 amps 3Ø
400 VAC 31 amps 3Ø
Water Input ¾" NPT
Drain ¾" NPT
Air Exhaust 6" (static)
No-Clean Flux Removal Yes
Water Soluble Flux Removal Yes
Rosin Flux Removal Yes
Lead & Lead-Free Compatible Yes
Average Cycle Time 30 minutes
Estimated Assemblies Per
Hour Per Chamber
3" x 10" - 144/hr
4" x 5" - 192/hr
8" x 10" - 44/hr
20" x 20" - 24/hr
Anti-Shadowing Technology Oscillating board rack and asymmetrical nozzles
Fluid-Delivery Technology Twenty 15° stainless steel adjustable nozzles
Built-In Cleanliness Testing Standard
Discharge Configuration Closed-loop (zero discharge) wash and rinse
Chemical Dosing and Mixing Automatic (5% - 20%)
SPC Data Logging with
On-Screen Viewing
Standard
SPC Data USB Export Standard
SPC Remote Viewing Standard
Heated Drying System Standard
Pre-Drain Filtration System Standard
Programmable Maintenance Reminders Standard
Control System Windows® 7 computer
Operator Interface Touchscreen Interface
Multi-Lingual Display Yes (English, Spanish, Chinese, Russian, German)
ESD Ground Point Standard

For equipment suggestions specific to your production needs, email sales@manncorp.com or contact one of our Sales Managers:

Chris Ellis - EAST COAST 215.869.8374

Ed Stone - WEST COAST 215.808.6266

Privacy Policy | Terms & Conditions
@ 2021 Manncorp.com. All Rights Reserved