StencilWasher ZDO Stencil Cleaner

Ultrasonic StencilWasher ZDO combines a wash solution filtration and recirculation system with a rinse water recycler to eliminate the need to send any wastewater to drain.

QUESTIONS? TEXT OR CALL

Chris Ellis 215-869-8374
EAST COAST
Ed Stone 215-808-6266
WEST COAST
PRINT
F1024:
Lockable Casters for StencilWasher LDO & ZDO + $655.00
A1388:
Adjustable Misprint Rack + $1450.00
10032:
Simple Green Stencil & Misprint Cleaner, 1 Gallon + $205.00
10035:
StencilWash PLUS Solder Paste and Adhesive Remover, 5 Gal. + $360.00

Uses ultrasonic technology

StencilWasher ZDO uses ultrasonic technology to remove both un-reflowed solder paste—including dried-on pastes—and uncured adhesives from stencils, screens and misprints, gently and without risk of damage. StencilWasher ZDO is effective even on fine-pitch stencils.

 

Complete wash, rinse and dry functions

Complete wash, rinse and dry functions are included, along with a programmable wash cycle timer, wash solution heater, wash and rinse solution filtration, powered drain/filtration pumps, rinse and dry wants, stainless steel wash and rinse tanks, drip-proof stainless steel decks and more. StencilWasher ZDO's ultrasonics are generated by 100-watt side-mounted transducers.

 

Accommodates large PCBs

StencilWasher ZDO accommodates stencils, screens and misprinted PCBs to 29" x 29" (736 x 736 mm).

 

Application
Solder paste & uncured adhesive removal
Dimensions
48" L x 34" W x 40" H
Weight
550 lbs
Construction
Welded tube steel frame and 16-gauge steel panels
Finish
Power-coat epoxy
Internal Plumbing
Stainless steel polypropylene
Electrical Requirements
208-240 VAC 1 Ø 50 amps
Wash Tank Capacity
35 gallons (132 liters)
Maximum Stencil Size
29" x 29" (74 cm x 74 cm)
Full immersion
Drain Requirements
3/4" NPT (service use only)
Wash Cycle Timer
Digital 1-99 minutes
Ultrasonics
1000-watt side-mounted transducers
Hand-Held Rinse Wand
Standard
Hand-Held Airknife
Standard
Wash Solution Heating
Standard
Wash Solution Filtration
Standard
Rinse Water Recycling
Standard

For equipment suggestions specific to your production needs, email sales@manncorp.com or contact one of our Sales Managers:

Chris Ellis - EAST COAST 215.869.8374

Ed Stone - WEST COAST 215.808.6266

@ 2021 Manncorp.com. All Rights Reserved