StencilWasher LDO Stencil Cleaner

Ultrasonic StencilWasher LDO removes all types of un-reflowed solder paste, including lead-free, as well as uncured adhesives from stencils, screens and misprinted PCBs, safely and gently. Its built-in wash-solution filtration and recirculation system cuts down on the amount of wastewater sent to drain while maximizing the useful life of your wash solution.

QUESTIONS? TEXT OR CALL

Chris Ellis 215-869-8374
EAST COAST
Ed Stone 215-808-6266
WEST COAST
PRINT
F1024:
Lockable Casters for StencilWasher LDO & ZDO + $655.00
A1388:
Adjustable Misprint Rack + $1450.00
10032:
Simple Green Stencil & Misprint Cleaner, 1 Gallon + $205.00
10035:
StencilWash PLUS Solder Paste and Adhesive Remover, 5 Gal. + $360.00

Minimize wash solution costs

Minimize your wash solution costs with the StencilWasher LDO, which uses a built-in wash-solution filtration and recirculation system to reuse wash solution rather than sending it directly to drain.

 

Uses ultrasonic technology

StencilWasher LDO uses ultrasonic technology to remove both un-reflowed solder paste—including dried-on pastes—and uncured adhesives from stencils, screens and misprints, gently and without risk of damage to delicate stencils. StencilWasher LDO is effective even on fine-pitch stencils.

 

Complete wash, rinse and dry functions

Complete wash, rinse and dry functions are included, along with a programmable wash cycle timer, wash solution heater, wash solution filtration, powered drain/filtration pumps, rinse and dry wants, stainless steel wash and rinse tanks, drip-proof stainless steel decks and more. StencilWasher LDO's ultrasonics are generated by 1,000-watt side-mounted transducers

 

Accommodates large PCBs

StencilWasher LDO accommodates stencils, screens and misprinted PCBs to 29" x 29" (736 x 736 mm).

 

Application
Solder paste & uncured adhesive removal
Dimensions
48" L x 34" W x 40" H
Weight
550 lbs
Construction
Welded tube steel frame and 16-gauge steel panels
Finish
Power-coat epoxy
Internal Plumbing
Stainless steel polypropylene
Electrical Requirements
208-240 VAC 1 Ø 50 amps
Wash Tank Capacity
35 gallons (132 liters)
Maximum Stencil Size
29" x 29" (74 cm x 74 cm)
Full immersion
Drain Requirements
3/4" NPT
Wash Cycle Timer
Digital 1-99 minutes
Ultrasonics
1000-watt side-mounted transducers
Hand-Held Rinse Wand
Standard
Hand-Held Airknife
Standard
Wash Solution Heating
Standard
Wash Solution Filtration
Standard

For equipment suggestions specific to your production needs, email sales@manncorp.com or contact one of our Sales Managers:

Chris Ellis - EAST COAST 215.869.8374

Ed Stone - WEST COAST 215.808.6266

@ 2021 Manncorp.com. All Rights Reserved