PCB Depaneling

View as List

GRID VIEW

Grid

LIST VIEW

6 Items

per page
  1. 520N Motorized PCB Depaneling Machine

    520N Motorized PCB Depaneling Machine

    VIEW PRICING

    The 520N PCB depaneler's unique "open tunnel" design provides sufficient clearance to separate pre-scored/V-groove single or double-sided boards. Panels are securely stabilized to prevent wobble or unwanted board movement during process, ensuring clean separations of boards of virtually any length. Twin rotary blades cleanly separate panels, with the motorized upper blade doing to the separating while the below-board blade guides the PCB through.

    Learn More
  2. SDM223 Motorized PCB Depaneler

    SDM223 Motorized PCB Depaneler

    VIEW PRICING

    SDM223 motorized PCB depaneler provides dependable, burr-free separation of pre-scored boards without stress or damage to the PCBs, nearby components, or solder joints. Operation is quick and easy. Simply align the V-groove with the extended lower guide. Lock the upper blade to the exact thickness of the PCB. The motorized lower blade transports and cuts the board while the upper "coasting" blade acts as a guide to maintain proper alignment along the pre-scored groove. SDM223 can separate densely-populated panels up to 400 mm (15.7") long with components located as close as 1 mm to the V-groove. Separating speeds are adjustable from 0 to 350 mm/sec (13.8"/sec) to provide the optimum balance of performance and throughput for each job.

    Learn More
  3. SDM101 Manual PCB Depaneling Tool

    SDM101 Manual PCB Depaneling Tool

    VIEW PRICING

    The SDM101 precision depaneler combines a topside circular cutter with a below-board linear knife for smooth, burr-free separation of PCBs along the scoring groove. The design of the SDM101 eliminates stress on the board and the components during the separation process, preventing post-breakout-related board, component and solder joint defects even when components are located as close as 1 mm to the scoring line. SDM101 can be used with panels that are v-scored in the X direction or X & Y directions and PCB thicknesses from 0.8 mm to 3.0 mm. The large processing table can be angled to permit processed boards to fall away. This low-maintenance PCB separator requires no power or air for $0 utility costs and the ability to use the machine anywhere in the facility. Sturdy, heavy-duty design. A shatterproof Plexiglas safety shield protects operator from cutting blade.

    Learn More
  4. SDM121 Motorized PCB Depaneler

    SDM121 Motorized PCB Depaneler

    VIEW PRICING

    Motor-driven SDM121 separates v-scored PCBs without stress to boards, components or solder joints, eliminating post-breakout defects such as delamination and microcracking, even when components are located as close as 1 mm to the scoring line. Operation is simple: the blades are aligned to the score line, the blade height is locked, and a depaneling speed is chosen. When the operator activates the foot switch, the topside circular blade moves automatically along the v-groove, providing a smooth, burr-free cut without operator guidance. The large processing table can be angled to allow separated PCBs to fall away from the cutter. For safety, the circular blade is shielded by shatterproof Plexiglas while light sensors halt the blade immediately if an obstruction is detected. SDM121 is suited for medium to high-volume production. A maximum component height of 32 mm provides sufficient clearance for most through-hole components and virtually all SMDs. The SDM121 is available with 445 mm (17.5") or 483 mm (19") maximum cutting length. Cut length is fully programmable; programmed length is displayed on an LED readout.

    Learn More
  5. SDM313 PCB Depaneling Machine

    SDM313 PCB Depaneling Machine

    VIEW PRICING

    PCBs are separated by the SDM313's dual wedge-shaped knives in one gentle rocking motion that shears the panel along the score line, without stress or damage to the PCBs or components. Even when metalized circuit boards are processed – such as those populated with heat-generating LEDs that require heat-dissipating metal inner layers – this machine will easily make the cut. SDM313 also cuts flexible and ultra-thin PCBs (down to 0.5 mm thick) clean, with no ripping or tearing, even when sensitive components such as delicate ceramic capacitors, are mounted within 0.5 mm of the score line. The linear, rather than circular, cutting surfaces allow for faster separations without added stress. Alignment between the SDM313's linear cutting blades and the panel's score line is achieved using a knob at the top of the machine. The narrow separation between the upper and lower blades (a maximum of 4 mm) protects the operator from the blade edges.

    Learn More
  6. SDM236 LED Depaneler

    SDM236 LED Depaneler

    VIEW PRICING

    The SDM236 LED Depaneler has been specially designed to separate extra-long, V-grooved, aluminum panels and thick FR4 PCBs that are often difficult to cut. With PCB support platforms (standard) installed on opposite ends of the depaneler for loading and unloading, the entire system is more than 2.3 meters (91") long and allows more than ample space for handling long 1.2 m (48") substrates commonly used in the manufacture of LED lighting products. The platforms can also accommodate a 370 mm (14.5") panel width for even greater versatility and throughput.

    Learn More
View as List

GRID VIEW

Grid

LIST VIEW

6 Items

per page
@ 2021 Manncorp.com. All Rights Reserved