SDM101 Manual PCB Depaneling Tool

The SDM101 precision depaneler combines a topside circular cutter with a below-board linear knife for smooth, burr-free separation of PCBs along the scoring groove. The design of the SDM101 eliminates stress on the board and the components during the separation process, preventing post-breakout-related board, component and solder joint defects even when components are located as close as 1 mm to the scoring line. SDM101 can be used with panels that are v-scored in the X direction or X & Y directions and PCB thicknesses from 0.8 mm to 3.0 mm. The large processing table can be angled to permit processed boards to fall away. This low-maintenance PCB separator requires no power or air for $0 utility costs and the ability to use the machine anywhere in the facility. Sturdy, heavy-duty design. A shatterproof Plexiglas safety shield protects operator from cutting blade.

Requires Account Log-In or Sign-Up

QUESTIONS? TEXT OR CALL

Chris Ellis 215-869-8374
EAST COAST
Ed Stone 215-808-6266
WEST COAST
PRINT
CB1-A1615:
Single inclined replacement circular blade for SDM-101/121 + $595.00
LB1-A1615:
Single inclined replacement linear blade for SDM-101/121 + $850.00
SDM101 SPECIFICATIONS
PCB Thickness 0.8 mm to 3.0 mm
Maximum Depaneling Length 445 mm (17.5") or 483 mm (19")
V-Scoring Lines Specs:
  • Depth of scoring (A): ≥ 0.25 mm
  • Remaining PCB thickness (B): 1.0 mm max
  • Component from scoring (C): ≥ 1 mm
  • Scoring angle θ: ≥ 20˚ (typical)
  • Max. component height (D): 32 mm
Depaneling Mode Manual
Separating Speed Dependent on operator
Production Rate Moderate volume
Scoring Angle 20˚
Minimum Component
Distance from V-Groove
1 mm
Maximum Component Height 32 mm (1.26")
PCB Materials FR4, CEM3, etc.
Processing Table 500 x 165 mm (19.7" x 6.5")
Dimensions (L x W x H) 750 mm x 240 mm x 742 mm
(29.5" x 9.4" x 18.5")
Net Weight 32 kg (70.5 lbs)
Shipping Weight 66 kg (146 lbs)

 

For equipment suggestions specific to your production needs,
email sales@manncorp.com or contact one of our Sales Managers:

Chris Ellis - EAST COAST 215.869.8374

Ed Stone - WEST COAST 215.808.6266

Privacy Policy | Terms & Conditions
@ 2021 Manncorp.com. All Rights Reserved