tp
ULTIMA-NEO-L-Selective-Solder MC-385-Pick-and-Place MC-301-Benchtop-Batch-Reflow-Oven CR-5000-Reflow-Oven 16-350-Ultra-Compact-Wave-Solder

Manufacturing costs up due to the new import tax? Contact Manncorp to help reduce costs.

56
All Products In Category:  Sherlock-300F | Sherlock-300I | Sherlock-300B | BC Series | CT Series | BE-100M-W1

Sherlock-300I Inline AOI Machine

Add PCB inspection to your automated production line, pre- or post-reflow, and speed up your process. Inline Sherlock-300I AOI system inspects components and solder joints on SMT, through-hole and mixed-technology boards and communicates with downstream equipment for automatic good/bad board sorting. The user interface is 100% touch control—as easy to use as a tablet.

Quick Contact — TEXT or CALL:

Chris — East Coast: 215.869.8374

Ed — West Coast: 215.808.6266

Sherlock-300I automated optical inspection (AOI) system For PCB Boards

Specifications

Component Coverage Down to 0201 (01005 available)
Minimum PCB Size 2" x 2" (50 mm to 50 mm)
Maximum PCB Size 13" x 9.85" (330 mm x 250 mm)
Topside Clearance 1.18" (30 mm) with standard lens, 0.98" (25 mm) with high magnification (including PCB thickness) 
Bottomside Clearance 1.18" (30 mm)
Lighting System RBG and warm-white illumination in 3-ring arrays
Camera 2.2-megapixel color camera with 2/3" CMOS sensor with Camera Link for high-speed data transmission and telecentric lens
Resolution 20 µm standard lens
14 µm high-magnification lens
Depth of Field 0.39" (10 mm) standard lens
0.24" (6 mm) high-magnification lens
Field of View 1.61" x 0.87" (41 mm x 22 mm) standard lens
1.14" x 0.59" (29 mm x 15 mm) high-magnification lens
Scanning Speed 50cm2/sec
Motion Control Bi-axial (X-Y) belt-driven
Repeat Position Accuracy 50 µm
Control Resolution 10 µm/pulse
Programming Automatic CAD conversion, pre-defined customizable component library, touch-screen-based teaching
Offline Programming Available
Repair Station Software Available
SPC Software Available
Computer Control Core 4 Xeon with 4 GB RAM, Windows® 7 Professional, 64-bit
Power Requirements AC100V to 230V single-phase
Air Supply 0.5 Mpa, 5 l/min(ANR)
Environmental Requirements Operation: 10 to 35° C/30-80% non-condensing RH
Storage: -10 to 60° C/30-80% non-condensing RH
Weight 337 lbs (153 kg) just the unit
386 lbs (175 kg) including PC
Dimensions (w x d x h) 24" x 30" x 51" (620 x 758 x 1294 mm)
(Alert light adds 11" (280 mm) in height)
Warranty 1-year
Remote service & support Included

Details

Smart, Compact, Inline
Sherlock-300I integrates cleanly with your existing production line to provide complete defect coverage before and/or after reflow or after wave soldering. Powerful algorithm-based software detects defects and helps to improve your process. Programming can optionally be done at an offline station to prevent disruption of production.

Post-inspection, Sherlock-300I sends the appropriate signal to downstream equipment, allowing passed PCBs to continue down the line or be unloaded to a rack. If it is rejected, it can be stopped at an inspection conveyor or unloaded to a separate rack marked for rework/repair.
Easy to program and operate
All programming and operation is done through the Sherlock-300I’s intuitive touch-screen interface. Automatic pick & place and CAD data conversion and a pre-defined, customizable parts library not only speed up programming but also eliminate the need for skilled AOI personnel.

Unlike the libraries included with many other systems, the Sherlock 300 library contains comprehensive inspection data for each part, including image processing settings, lighting conditions, areas to be checked, and more. Custom parts can be quickly created from any pre-defined part.

The software was designed to make operation easy and convenient: The interface is instantly intuitive. If there’s any doubt, “Navigation Mode” can step the operator through tasks, and online help is only a click away.

For optimum speed and traceability, the Sherlock-300’s camera reads 2D and linear bar codes—no separate bar code scanner is required. The system also performs character recognition, allowing it to process and compare component labels.

The software also features easy zooming in and out to get a better look at defects. It also presents quick-stats on defective parts.
High Defect Coverage
Sherlock-300I uses a high-resolution, 2.2-megapixel CMOS camera, a large-aperture telecentric lens, and two lighting systems to achieve fast, accurate inspection of both solder quality and components at a scanning rate of 50 cm2/sec.

The RGB LED lighting system inspects solder fillets for volume and shape. The three-tier white lighting system inspects component placement and positioning, with reflection and shadow controls to ensure low false calls and low false accepts.

The standard lens inspects parts down to 0201, or the Sherlock-300I can be fitted with a high-magnification lens to inspect parts down to 01005. Both of these telecentric lenses eliminate perspective errors, reduce distortion toward the edges of the field of vision, and provide uniform image plane illumination.

There is no need for the expense of high-megapixel cameras or multiple side-angle cameras with this system. It has been designed to provide accurate, reliable inspection results with the lowest complexity of programming and at a cost that’s within reach of small and medium manufacturers.
Quality Components Throughout
During inspection, the camera moves, rather than the PCB. This ensures the clearest possible images and fastest inspection speeds. The camera motion system is X-Y bi-axial belt-driven with 50 µm positional accuracy.

The board transport system automatically adjusts to the size set in the program. Sherlock-300I comes standard with a pneumatic PCB stopper and vacuum clamp. It can optionally be purchased with a motor to eliminate the need for a compressed air source.

Operation is smooth and quiet, thanks to the machine’s sturdy, vibration-damping construction.

All components are high quality, Japanese-made.
Keep Control of Your Process
Do more than detect bad PCBs. Improve your whole process with the addition of statistical process control (SPC) software. This software, installed on a separate computer from the Sherlock-300, allows you to detect process abnormalities early, view trends over time, and discover where your problem areas are.
Trace and Repair
Repair station software designed to work with the Sherlock-300I simplifies rework by providing details at the repair station on each rejected board. Repair station personnel can access an image of the rejected part, with its location, name and details of inspection. With the connection of a bar-code reader, board data can be brought up on screen with a quick scan of the PCB’s label.

History of inspection and repairs can be search by serial number. When linked with the SPC software, repair data can be tallied, providing complete traceability.
Automatic Sorting of Good Boards from Bad
Sherlock-300I communicates with downstream board handling equipment to allow automatic sorting of passed boards from rejected/no-good (NG) boards. This video shows NG boards being unloaded to different magazine racks depending on the status sent from the Sherlock-300I to the board handling equipment. Paired with a board loader, the inline model can be used like a batch system, capable of being used for jobs with multiple lines and/or with non-automated production lines. Watch it in action:
Defect Coverage
Sherlock-300’s scanning speed is independent of the number of components on the board: even densely populated boards are scanned at rates of 50 cm2/second. Fast cycle times keep the system from bottlenecking production—a 7.3" x 5.1" (185 mm x 130 mm) PCB with 253 parts can be processed in 10 seconds, including load and unload time.

Sherlock-300I is capable of detecting, with high accuracy:
  • Solder joint defects
  • Presence of solder
  • Insufficient solder
  • Excessive solder
  • Opens
  • Cold solder
  • Solder balling
  • Bridging
  • Poor soldering
  • Lifting
  • Fillet coverage (THT)
  • Wetting (THT)
  • Partial and full lack of solder (THT)
  • Blowholes (THT)
  • Component defects
  • Missing or extra components
  • Wrong components
  • Shifting
  • Tombstones
  • Reverse polarity
  • Damaged parts
  • Bent IC leads
  • Pin presence (THT)
  • Bent pins (THT)
One-year warranty + remote service support
To protect your investment, the Sherlock-300I comes with a 1-year parts warranty and access to telephone and email technical support. Manncorp technicians are employees, not contractors, with years of experience at all levels of circuit board assembly.

Remote service support software and a network adapter comes with every Sherlock-300 series machine, allowing Manncorp technicians to troubleshoot remotely over the Internet.
Previous customers, click here to login.
I Want to See Prices, Request Quotes and/or Buy Online
I Only Want to See Prices

Complete and submit the form below for access to pricing on all our products. (Your browser must allow cookies for this to work.)
Previous customers,
click here to login for pricing
.

* Required
*
*
*
*
*

Previous customers,
click here to login
.


Previous customers, click here to login.
We only need a few more pieces of information to upgrade your access!

Enter your question below and we will get back to you promptly.

Fill out the form below and we will send your colleague a link to this page on your behalf.
Message

Submitting Form. Please Wait...

Successfully completed.

Thank you.

A new user account has been created for you and an email with your user name and password was sent to the email address you supplied.

When you close this form you will be logged in and will be able to see all pricing and request quotes or purchase products.

On future visits simply login.

There was an error submitting your information.
You can contact us directly by phone at 215.830.1200 or send an email to sales@manncorp.com.