SDM313 PCB Depaneling Machine

PCBs are separated by the SDM313's dual wedge-shaped knives in one gentle rocking motion that shears the panel along the score line, without stress or damage to the PCBs or components. Even when metalized circuit boards are processed – such as those populated with heat-generating LEDs that require heat-dissipating metal inner layers – this machine will easily make the cut. SDM313 also cuts flexible and ultra-thin PCBs (down to 0.5 mm thick) clean, with no ripping or tearing, even when sensitive components such as delicate ceramic capacitors, are mounted within 0.5 mm of the score line. The linear, rather than circular, cutting surfaces allow for faster separations without added stress. Alignment between the SDM313's linear cutting blades and the panel's score line is achieved using a knob at the top of the machine. The narrow separation between the upper and lower blades (a maximum of 4 mm) protects the operator from the blade edges.

QUESTIONS? TEXT OR CALL

Chris Ellis 215-869-8374
EAST COAST
Ed Stone 215-808-6266
WEST COAST
PRINT
LU3:
LU3 UPPER LINEAR BLADE + $1500.00
LL3:
LL3 LOWER LINEAR BLADE + $1500.00
PCB Thickness
0.5 mm to 1.2 mm (with minimum 0.15 mm scoring depth)
Up to 2.0 mm (with minimum 0.5 mm scoring depth)
Maximum Depaneling Length
300 mm (11.8") with 0.5 mm remaining PCB thickness
200 mm (7.9") with 1.0 mm remaining PCB thickness
V-Scoring Lines Specs:
  • Depth of scoring (A): ≥ 0.15 mm
  • Remaining PCB thickness (B): 1.0 mm max
  • Component from scoring (C): ≥ 0.5 mm*
  • Scoring angle θ: ≥ 20˚ (typical)*
  • Max. component height (D): 20 mm
*Based on standard cutting blade
Custom linear blade available; please contact us.

Depaneling Mode
Pneumatic
Separating Speed
N/A
Production Rate
High volume
Scoring Angle
20˚
Minimum Component Distance from V-Groove
0.5 mm
Maximum Component Height
20 mm
PCB Materials
Aluminum, FR4, CEM3, etc.
Air Requirement
4 to 6 bar
Dimensions (L x W x H)
259 mm x 595 mm x 380 mm
(10.1" x 23.4" x 14.9")
Net Weight
140 kg (309 lbs)
Shipping Weight
166 kg (366 lbs)

For equipment suggestions specific to your production needs, email sales@manncorp.com or contact one of our Sales Managers:

Chris Ellis - EAST COAST 215.869.8374

Ed Stone - WEST COAST 215.808.6266

@ 2021 Manncorp.com. All Rights Reserved