PCB Line Combiner / Separator

When used to merge two production lines into one, the PC350W-ST line combiner/separator can take advantage of the increased throughput of a single reflow oven. Or, it can split a single line into two to get more mileage out of a higher speed stencil printer by allowing it to serve a second line. The latter mode is also ideal for post-inspection separation of boards into passed/failed categories as well as to conduct test or rework loops. By integrating the capabilities of each machine in your line, the PCB line combiner/separator maximizes the potential of the entire PCB assembly operation. It will thus be a key asset in your production that will pay for itself over and over again.

Requires Account Log-In or Sign-Up


Chris Ellis 215-869-8374
Ed Stone 215-808-6266

Flow Diagrams

The PCB Line Combiner / Separator (PC350W-ST) accommodates board widths to 460 mm. If you require a larger board width, contact Manncorp for custom pricing.

PCB Line Combiner / Separator Specifications
PCB Size 50 mm L x 50 mm W to 400 mm L x 460 mm W
(1.97" L x 1.97" W to 15.75" L x 18.11" W)
PCB Thickness 0.4 mm min. (0.016" min.)
2.5 mm max. (0.098" max.)
Conveyor Direction Front Rail Fixed left to right (standard) or right to left (optional)
Conveyor Height 900 +50/-20 mm (35.5" +2"/-0.75")
Conveyor 3 mm Edge Belt
Voltage 110 VAC, 50/60 Hz
Power 300 VA max.
Controls Omron PLC Controller
Yamatake Japan Sensor Control
Machine Dimensions 3800 mm L x 600 mm W x 1100 +50/-20 mm H
(12.5" x 23.5" x 39" + 2"/-0.75")
Net Weight 300 kg (662 lbs.)
Shipping Weight 450 kg (992 lbs.)


For equipment suggestions specific to your production needs,
email sales@manncorp.com or contact one of our Sales Managers:

Chris Ellis - EAST COAST 215.869.8374

Ed Stone - WEST COAST 215.808.6266

Privacy Policy | Terms & Conditions
@ 2022 Manncorp.com. All Rights Reserved