Automatic Telescoping Passageway Conveyor

When was the last time you checked traffic patterns of workers on your production floor? If they have to detour around a long line of machinery to go about their normal tasks, those extra steps could add up to many hours lost to inefficiency. Manncorp's automatic passageway conveyor is designed to eliminate this issue by serving as a gateway to allow personnel passage through desired locations in the PCB assembly line.


Chris Ellis 215-869-8374
Ed Stone 215-808-6266


Select Conv_Dir*

Left to right (standard)
Right to Left

Automatically opens and closes

The ST conveyor model is completely automatic. When its sensors detect the presence of someone wishing to cross the production line, the conveyor is halted momentary and the ST automatically telescopes into the housing to create a passageway. Immediately after the line is crossed, the conveyor returns to its normal position.

Passageway Conveyors Comparison: GL-350W-SB and GC-350W-ST

Model GL-350W-SB GC-350W-ST
Description Folding passageway conveyor Automatic extending passageway conveyor
Machine Dimensions 1320mm L x 550mm W x 900mm H
(52" L x 21.7" W x 35.5" H)
1700mm L x 750mm W x 1200mm H
(67" L x 29.5" W x 47.25" H)
PCB Size 400mm x 50mm-350mm
(15.74" x 2"-13.78")
Power 110V, 50-60Hz  
Weight 200 kilos 230 kilos
Supply pressure 5kgf/cm²  
PCB Direction Left to right (standard) or right to left (optional) operation  

For equipment suggestions specific to your production needs, email or contact one of our Sales Managers:

Chris Ellis - EAST COAST 215.869.8374

Ed Stone - WEST COAST 215.808.6266

@ 2021 All Rights Reserved