Manufacturing costs up due to the new import tax? Contact Manncorp to help reduce costs.

All Products In Category:  MC-300 | MC-400 | MC-385V1V | MC-385V2V | MC-392 | MC-389 | MC-388 | MC-LEDV6 | MC-LEDV4 | MC-LEDV4-1800 | SMT Place 2000

MC-385V2V Dual-Head Pick and Place

Speed and accuracy plus 128-feeder capacity make the MC-385V2V ideal for high-mix jobs or frequent job changes. Places 0201s (01005s optional) to 100 x 150 mm components, including BGAs, MBGAs, CSPs, micro lead frames and more.

Quick Contact — TEXT or CALL:

Chris — East Coast: 215.869.8374

Ed — West Coast: 215.808.6266

MC-385V2V dual-head SMT pick and place machine



Placement Specifications
Number of Placement Heads 2
Placement Rate (IPC-9850)* 5,500 CPH
Placement Rate (Max.) 8,000 CPH
Placement Accuracy 30 µm, 3 Sigma
Minimum Component Size 0201 (01005 optional)
Maximum Component Size 100 mm x 150 mm (3.94" x 5.9")
Minimum Component Lead Pitch 0.3 mm (0.012")
BGA/CSP Placement Capability Yes - Standard
Alignment Method Dual-Vision Alignment System
Pick Up Specifications
Tool Changer Included
Number of Tools 15
Accepts Additional Tool Changers Yes
Integral Vacuum Yes
PCB Specifications
PCB Loading Method Manual, In/Out Conveyor or Inline Conveyor
Max. Placement Area 350 mm x 435 mm (13.8" x 17.1")
Fiducial Recognition/ Coordinate Correction Yes
Bad Mark Detection Yes
Feeder Capacity
Maximum Number of Feeder Ports 128
Operating System Windows® Based
PC, Keyboard, Mouse Yes
Monitor Flat LCD
Teaching Camera Yes
Numeric Data Entry Yes
CAD Download Yes
Step and Repeat for Matrix Boards Yes
Bar Code Reader for Feeders & Packaging Yes
MIS and Optimization Functions Yes
Off-Line Programming Yes
Dispenser Specifications
Dispensing Head Optional
Dispense Method Time/Pressure
Dot Size / Placement Speed Down to 0.5 mm / Up to 6,000 dots./hr
Mechanical Specifications
X-Y Axis Drive Mechanism Ball Screw
X-Y Axis Drive Motors AC Servo
X-Y Axis Encoding Linear
X-Y Axis Resolution 0.005 mm (0.0002")
X-Y Axis Repeatability ±0.01 mm (10 µm)
Z Axis Drive Motor DC Servo
Z Axis Encoding Rotary
Z Axis Resolution 0.02 mm (0.0008")
Θ Axis Drive Motor DC Servo
Θ Axis Encoding Rotary
Θ Axis Resolution 0.045°
Θ Axis Range of Motion 360°
Physical Specifications
Overall Dimensions
(Approx. L x W x H)
1270 mm L x 990 mm W x 1320 mm H
(50" x 39" x 52")
Approximate Net Weight 660 Kg (1455 lbs.)
Facility Requirements
Standard Voltage 200-230 VAC, 50/60 Hz, 11A
Air Pressure 80 psi, 8 CFM
Service and Support
Remote Diagnostics Ethernet
Warranty (Major Components) 1 Year


Two Heads for Increased Throughput
Extra-large placement area can be shared with waffle trays and cut tape strip holders.

MC-385V2V features two placement heads, each fitted with fast, efficient, Cognex® on-the-fly vision and mounted on high-speed AC servo motors to achieve placement rates reaching 8,000 pph (5,500 pph per IPC 9850).

High-Precision, Direct Drive, Ballscrew and Linear Encoder Technology
MC-385V2V pick and place machine high-precision ballscrew drive and linear encoders

High-quality build and components ensure a level of repeatability and accuracy that other pick and place machines in the MC-385V2V's price range can't match. High-precision ballscrew drive and linear encoders ensure placement accuracy of 30 µm, 3 Sigma.

Dual Vision Systems Cover Widest Range of Components
MC-385V2V pick and place machine dual-vision system for 0201s (or 01005s) through 100 x 150 mm

The head-mounted Cognex® camera provides true, non-contact alignment "on the fly" for the smallest parts, including CSPs and µBGAs, allowing for maximum speed and efficiency. Standard camera handles parts down to 0201s. 01005 capability is available as an option.

The other camera, a base-mounted, upward-aimed system, handles larger SMDs, including large BGAs, up to 100 x 150 mm. 

High Feeder Capacity for Fast Job Changes
Up to 128 smart tape feeders can be mounted on the MC-385V2V, as well as cut tape strips, stick feeders and waffle trays

With 32-port Smart Feeder Bases installed on all four sides, MC-385 has a max feeder capacity of 128 tape feeder ports. Tape feeders from 8 mm to 72 mm are available. The 8 mm feeders require only one port each on the feeder base; larger feeders will require more. Your Manncorp sales professional can help you determine how many feeder ports your jobs will require based on your BOM.

In addition to tape and stick feeders, waffle trays and cut strip tape holders can be used in the placement area. MC-385V2V also allows for pick up, orientation and placement of loose components from bulk component trays. See that in action.

Smart Feeders for Fast, Error-Free Setup
Smart tape and stick feeders can be mounted on the same base.

Each smart feeder base holds 32 slim-profile 8-mm standard or half-step Smart Tape Feeders or up to 50 individual stick/tubes (using Smart IC Tube Holders). Smart Tape Feeders and Smart IC Tube Holders can be used together on the same feeder base for maximum flexibility. Cut tape strip and waffle tray holders can be used in the placement area.  Learn more about MC series feeders.

Large Placement Area
MC-385V2V large placement area

With the maximum of four feeder bases installed, MC-385V2V's placement area of 370 mm x 350 mm (14.5" x 13.8") still allows room for a waffle tray or cut strip tape holder alongside the PCB. When only front and back feeder ports are used, the placement area increases to 435 mm x 350 mm (17.1" x 13.8").

Easy to Use, Field-Tested Software
Easy to use software

MC-385 uses the same robust, Windows®-based software as the higher end MC series machines. Customer feedback over the past ten years has created a very easy to use, stable and reliable system. 

  • Program via CAD import and conversion, teaching or direct entry.
  • Component library covers all common component package types and sizes, including resistors, capacitors, diodes, SOTs, PLCCs, QFPs, SOJs, SOPs, etc.
  • Component library data links to Smart Feeder software for easy feeder setup and inventory control.
  • When optional dispensing head is installed, dispensing patterns and parameters can be defined and assigned to specific components in the component library.
  • Virtual PCB Simulator displays a virtual assembly based on programming data.
  • Fiducial mark search routines identify and correct for PCB offset or misalignment.
  • Optimization tools analyze placement data and component mix to provide recommended feeder arrangement that minimizes head travel and tool changes, allowing for fastest production speeds.
  • Network adapter and remote diagnostic software allow for fast trouble-shooting by Manncorp techs.
Optional Conveyor
In/out and inline conveyor options available

MC-385V2V comes standard as a batch machine. Two conveyor options are available:

In/out conveyor. With this setup, the conveyor is located at the front of the machine, allowing for three feeder racks, with a maximum total feeder capacity of 96 8-mm feeders, to be installed on the machine. The operator places the board on the conveyor, the conveyor moves into the placement area, assembly is performed, and then the conveyor moves the board back out the front the machine for the operator to pick up and replace. This is more efficient than reaching into the machine.

Inline conveyor. This SMEMA-compatible conveyor can be used inline or with magazine racks and a board loader and unloader. Feeder racks can be installed on the front and back of the machine, for a maximum total feeder capacity of 64 8-mm tape feeders.

Add Dispense for Reduced Stencil Costs
MC-385V2V pick and place machine integrated dispenser option

MC-385V2V is also available with an advanced time pressure (ATP) dispensing system. This high-accuracy dispenser with closed-loop, microprocessor control dispenses solder paste and adhesives at dot sizes down to 0.5 mm diameter at rates to 6,000 dots/hour. Dispenser option must be selected at time of purchase; due to its tight integration with the machine, it cannot be retrofitted.

Solid Build for Stability & Accuracy
Heavy duty welded steel frame

Welded uni-body steel frame is four to five times heavier than other machines in this price range, providing the rigidity and stability needed to withstand the forces generated by the X-Y drive when running at high speeds, so that precision is maintained even at the upper end of MC-385V2V's placement capability.



DP4 Dispenser for all Manncorp MC Series Machines

Loose parts pick-up from bulk trays:

Cut strip tape holders
for short strips of components



MC-385V2V - Optics Specifications
On-the-Fly Alignment (standard)
Minimum Component Size 0.6 mm x 0.3 mm (0201)
Maximum Component Size 16 mm x 14 mm (0.63" x 0.55")
On-the-Fly 01005 Alignment (UG-CA-01005)*
Minimum Component Size 0.4 mm x 0.2 mm (01005)
Maximum Component Size 7 mm x 7 mm (0.27" x 0.27")
Stationary Base-Mounted Camera (BV-38; standard)
Minimum Component Size 0.6 mm x 0.3 mm (0201)
Maximum Component Size 38 mm x 38 mm (1.5" x 1.5")
100 mm x 150 mm (3.94" x 5.9") by 4-corner check
Stationary Base-Mounted Camera (BV-04; optional, can be used with BV-38)
Minimum Component Size 0.4 mm x 0.2 mm (01005)
Maximum Component Size 4 mm x 4 mm (0.16" x 0.16")

*Note: Replaces standard on-the-fly-alignment system. When using the UG-CA-01005 optics for on-the-fly alignment of 01005 components, all components over 7 mm x 7 mm must be aligned using the standard BV-38 base-mounted camera.

PCB Handling

MC-385V2V PCB Handling Specifications
Stand-Alone Configuration (Standard)
Max. Placement Area 350 mm x 370-435 mm
(13.8" x 14.5"-17.1")
Maximum Number of Feeder Ports 128
Max. Feeder Ports (Front) 32
Max. Feeder Ports (Rear) 32
Max. Feeder Ports (Right) 32
Max. Feeder Ports (Left) 32
In/Out Conveyor Configuration (Option)
Max. Placement Area 330 mm x 420 mm (13" x 16.5")
Maximum Number of Feeder Ports 96
Max. Feeder Ports (Front) 32
Max. Feeder Ports (Rear) 32
Max. Feeder Ports (Right) 32
Max. Feeder Ports (Left) 0
Inline Conveyor Configuration (Option)
Max. Placement Area 350 mm x 435 mm (13.8" x 17.1")
Maximum Number of Feeder Ports 64
Max. Feeder Ports (Front) 32
Max. Feeder Ports (Rear) 32
Max. Feeder Ports (Right) 0
Max. Feeder Ports (Left) 0
Previous customers, click here to login.
I Want to See Prices, Request Quotes and/or Buy Online
I Only Want to See Prices

Complete and submit the form below for access to pricing on all our products. (Your browser must allow cookies for this to work.)
Previous customers,
click here to login for pricing

* Required

Previous customers,
click here to login

Previous customers, click here to login.
We only need a few more pieces of information to upgrade your access!

Enter your question below and we will get back to you promptly.

Fill out the form below and we will send your colleague a link to this page on your behalf.

Submitting Form. Please Wait...

Successfully completed.

Thank you.

A new user account has been created for you and an email with your user name and password was sent to the email address you supplied.

When you close this form you will be logged in and will be able to see all pricing and request quotes or purchase products.

On future visits simply login.

There was an error submitting your information.
You can contact us directly by phone at 215.830.1200 or send an email to