MC389 High Speed High Mix Pick & Place

MC389 High Speed High Mix Pick & Place
Front View: SMT Pick and Place MC389 for High-Speed, High Mix PCBA
SMT Pick and Place MC389 for High-Speed, High Mix PCBA from Manncorp
MC389's 3 Pick & Place Heads
MC389 Feeder Rack & On-the-Fly Vision Cameras
Close-up of MC389 Feeder Rack
MC389 Bottom Vision Camera and Pick Up Nozzles
MC389 with PCB Shown on Conveyor
MC389 SMT Pick & Place Machine Shown with Covers Open - Front View
MC389 SMT Pick & Place Machine Shown with Covers Open - Rear View
MC389 Pick & Place Heads and On-the-Fly Cameras Gantry
MC389 Pick & Place Machine Interior
MC389 Pick & Place Machine Ports

MC389 High Speed High Mix Pick & Place

The MC389 sets new standards for SMT pick and place speed, precision, and flexibility. Based on the MC Series' durable ball-screw and rotary-encoded drive train, its three heads and on-the-fly vision allow accurate placement of any SMD (including 01005 chips, µBGAs, and 12-mil pitch QFPs). With an enormous placement area of 650 mm x 460 mm (25.6" x 18.1") and a capacity for up to 160 Smart Tape and Stick Feeders, the MC389 can easily be configured for virtually any high-mix project.

This item ships by freight. If you purchase it through our online store, our sales team will send you a quote for the freight costs after purchase.

Regular price $104,995.00
/
QUESTIONS? TEXT OR CALL:
Chris Ellis  215-869-8374 | East Coast
Ed Stone 215-808-6266 | West Coast

Speed, Accuracy, and Precision

This robust, high-mix machine provides stability and precision for all placements, even at high speeds, thanks to the following features:

  • 30 µm, 3 Sigma placement accuracy
  • Highly precise ball-screw X and Y drive
  • Closed-loop servo control system on all axes
  • Tough, unibody steel frame
  • Three-head gantry
  • Placement rates up to 10,500 parts per hour (IPC-9850)

Huge Component Range

  • Dual-vision alignment combines Cognex® on-the-fly with bottom stationary systems for fast, efficient placement of 01005s through 100 x 150 mm SMDs.
  • The machine conducts ball inspection and missing ball detection, with nonstandard ball patterns programmable and inspectable.
  • A 23-position automatic toolholder/changer with 20 standard nozzles is included.

Feeder Capacity and Flexibility

The MC389 has a large placement area of up to 650 mm x 460 mm (25.6" x 18.1"), depending on the number of feeder bases and the board handling method used. It holds a maximum of two 48-port feeder racks, front and back, plus two 32-port feeder racks on the sides, for a total feeder capacity of 160 8-mm tape feeders. The feeder racks can accommodate a mix of tape feeders and IC tube/stick feeders, plus waffle trays and cut strip feeder holders can be used in placement area (one waffle tray is included with the machine). 

Suitable for any inline or work cell manufacturing environment; single-stage and 3-stage SMEMA-compatible inline conveyors optional.

Easy Programming and Operation

This machine utilizes UCAD® (universal CAD) import and conversion for direct transfer of PCB data from ASCII, AutoCAD, and Excel data formats. It also has a built-in teaching, fiducial-recognizing camera. Prior to running production, the Virtual PCB Simulator offers assembly preview for component, coordinates, and orientation verification. Feeder placement and set-up/changeover optimization is available with Smart Feeders for tape and IC tubes/sticks.

Additional Touches

  • A computer controller with a flatscreen LCD display comes with the machine (keyboard and mouse included).
  • An included vision inspection capability allows cameras to be used for selectively checking solder paste printing and/or component placement accuracy.
  • The optional barcode reader scans component values, lot codes, dates, and component quantities directly from packaging for inventory management. *
  • The optional offline Smart Feeder Programmer allows Smart Tape and Stick Feeders to be programmed offline while the machine runs other jobs.
  • The optional temperature-controlled ATP digital system dispenses solder paste and adhesive.

*Two-dimensional barcodes on component reels cannot be interpreted by the software.

Placement Specifications
Number of Placement Heads 3
Placement Rate (IPC-9850)* 10,500 CPH
Placement Accuracy 30 µm, 3 Sigma
Minimum Component Size 01005
Maximum Component Size 100 mm x 150 mm (3.94" x 5.9")
Maximum Component Lead Pitch 0.3 mm (0.012")
BGA/CSP Placement Capability Yes - Standard
Alignment Method Dual-Vision Alignment System
 
Pick Up Specifications
Tool Changer Included
Number of Tools 15
Accepts Additional Tool Changers Yes
Integral Vacuum Yes
 
PCB Specifications
PCB Loading Method Manual loading in batch / standalone configuration (standard)
Single-stage and 3-stage inline conveyors (optional)
Maximum Placement Area 650 x 380 mm (25.6" x 15")
with conveyor
650 x 460 mm (25.6" x 18.1")
without conveyor
Fiducial Recognition / Coordinate Correction Yes
Bad Mark Detection Yes
 
Feeder Capacity
Maximum Number of Feeder Ports 96 with inline conveyor
160 batch configuration w/ feeders on four sides
Maximum Number of Waffle Trays Dependent on PCB size
 
Programming
Operating System Windows® Based
PC, Keyboard, Mouse Yes
Monitor Flat LCD
Teaching Camera Yes
Numeric Data Entry Yes
CAD Download Yes
Step and Repeat for Matrix Boards Yes
Bar Code Reader for Feeders & Packaging Yes
MIS and Optimization Functions Yes
Off-Line Programming Yes
Dispenser Specifications
Dispensing Head Optional
Dispense Method Time/Pressure
Dot Size/Placement Speed

Down to 0.5 mm
Up to 6,000 dots/hr

 
Mechanical Specifications
X-Y Axis Drive Mechanism Ball Screw
X-Y Axis Drive Motors AC Servo
X-Y Axis Encoding Rotary
X-Y Axis Resolution 0.005 mm (0.0002")
Z Axis Drive Motor DC Servo
Z Axis Encoding Rotary
Z Axis Resolution 0.02 mm (0.0008")
θ Axis Drive Motor DC Servo
θ Axis Encoding Rotary
θ Axis Resolution 0.045°
θ Axis Range of Motion 360°
 
Physical Specifications
Overall Dimensions (Approx. L x W x H) 1300 x 1420 x 1460 mm
(51" x 56" x 57")
Approx. Net Weight 1100 kg (2425 lbs.)
 
Facility Requirements
Standard Voltage 200-230 VAC, 50/60 Hz
Air Pressure 80 psi, 9 CFM
 
Service and Support
Remote Diagnostics Ethernet
Warranty (Major Components) 1 Year

Because feeder management and control software is included as part of the MC series pick & place software, smart feeding is standard on every MC series pick & place machine. A wide range of affordable, efficient and reliable smart tape and stick feeders are available, as well as waffle tray and cut tape strip holders.

  • High-precision design
  • Built-in memory modules and COM ports
  • Ultra-smooth electronic actuation and tape advance
  • Smart data linking optimizes setups, speeds job changes
  • Prevent feeders from being loaded in the wrong ports
  • Bar codes can be used for quick data entry and verification

Innovative Feeder with a Built-In Display

Information is stored directly, and constantly updated, within this new feeder. The OLED screen allows operators to review component quantities on reels, feeder slot locations, part numbers, part values, and more - all while the machine is in-use or offline. Being able to view this vital information on the feeder itself adds an extra level of insurance that the correct parts will be placed accurately from the onset, fixing problems before reaching the inspection stage.

  • Component reel information is now stored/updated in the feeder.
  • OLED displays allow for easy monitoring of the component consumption status.
  • The feeder has an internal battery, so data will always be available in both online (connected to machine) and offline (standalone) modes.
  • Vision library names are displayed (for example 0201, SOIC16, QFP44, etc.) and the feeder stores the lot & date codes of components.

Slim Design Maximizes Capacity

Manncorp MC series Smart tape feeders set a new standard for accurate, dependable and economical SMD presentation. The slim-profile design of these smart feeders maximizes the number of feeders that can be mounted in the space available on the pick and place machine.

Unique IDs Access Relevant Feeder Data When Feeder Is Plugged In

Each smart tape feeder has a DB-9 interface connector on its front end. The DB-9 plugs into any MC series smart feeder base to allow communication between the MC series control software and the memory module that's built into each feeder. The memory module stores a unique feeder ID number that, as soon as the feeder is plugged into a base, instantly links it with its relevant data: assigned feeder position (port), feeder size and type, component value, lot code, date code, starting quantity, index increment, and package type.

Automatic Index Adjustment Prevents Pick-Up Errors

MC series pick & place machines can use vision to calculate the offset of the component tape from the taught pickup position and index the tape feeder forward or backward accordingly. This feature is especially useful when reloading a feeder with a new reel where the alignment of the tape pocket position is slightly off from the position of the previous reel. If pickup errors associated with loose tolerances between components and tape pockets are a problem, this feature can be set to check and index on every pickup for the feeders with the problem tape reels.

Full Range of Feeder Sizes

Smart tape feeders are available in 8 mm to 72 mm widths with programmable tape index settings from 2 mm to 36 mm. Variable tape index settings, from 16 mm to 26 mm, can also be stored in the smart feeder memory modules. This is particularly useful for 32 mm through 72 mm tape widths when extra component length requires more than the standard 4 mm, 8 mm or 12 mm tape index. Storing these setting in the memory module ensures that the settings will be used for that feeder regardless of where it is loaded—even if it is loaded on a different machine.

Smart Tape Feeder Carts for Storage and Off-Line Kitting

Transport, store, and protect your valuable Smart Tape Feeders with the sturdy, dual-tiered Smart Tape Feeder Storage Carts. The model FR-ST64 (shown) holds as many as 64 individual 8 mm Smart Tape Feeders. This handy accessory can be wheeled easily from the kitting area to the production floor and organizes feeder handling for quick and efficient setup and changeover. The heavy-duty tubular construction holds each feeder securely and shields them from impact as they move around the assembly floor.

Tape Feeder Specifications

These tape feeders work with all Manncorp MC series pick and place machines.

Model # Tape Size Minimum Index Step Maximum Tape Thickness Feeder Base Port Positions Occupied Feeder Slot Pitch
KFTA2-8MM HS 8 mm 2 mm 3.3 mm 1 13.3 mm
KFTA2-8MM 8 mm 4 mm 3.3 mm 1 13.3 mm
KFTA2-12MM 12 mm 4 mm 7.0 mm 2 13.3 mm
KFTA2-16MM 16 mm 4 mm 12.0 mm 2 13.3 mm
KFTA2-24MM 24 mm 4 mm 12.0 mm 3 13.3 mm
KFTA2-32MM 32 mm 4 mm 12.0 mm 3 13.3 mm
KFTA2-44MM 44 mm 4 mm 12.0 mm 4 13.3 mm
KFTA2-56MM 56 mm 4 mm 12.0 mm 5 13.3 mm
KFTA2-72MM 72 mm 4 mm 12.0 mm 6 13.3 mm
KFTA3D-8MM SW 8 mm 2 mm 3.3 mm 1 15 mm
KFTA3D-8MM 8 mm 2 mm 3.3 mm 1 15 mm
KFTA3D-12MM 12 mm 4 mm 7.0 mm 1 15 mm
KFTA3D-16MM 16 mm 4 mm 12.0 mm 2 15 mm
KFTA3D-24MM 24 mm 4 mm 12.0 mm 3 15 mm
KFTA3D-32MM 32 mm 4 mm 12.0 mm 3 15 mm
KFTA3D-44MM 44 mm 4 mm 12.0 mm 4 15 mm
KFTA3D-56MM 56 mm 4 mm 12.0 mm 5 15 mm
KFTA3D-72MM 72 mm 4 mm 12.0 mm 6 15 mm
  • Universal design adjust to virtually any SMD length, width, or tube packaging dimensions
  • Available with 10 or 20 lanes
  • Mount directly on MC series smart feeder bases, alongside smart tape feeders
  • Memory modules link feeder lanes to specific component data

Universal Stick Feeders for Flexibility

Manncorp smart stick feeders can be positioned directly adjacent to Manncorp smart tape feeders and, like the tape feeders, are able to communicate with the MC series software via DB-9 interface connectors that plug into the smart feeder base. The memory modules store unique ID numbers that link the individual lanes in the feeder hardware with relevant feeder data, including assigned feeder position, component data, belt indexing increments, and on/off time control settings for the vibratory/gravity feed portion of the feeder.

Tape Feeder Specifications

These tape feeders work with all Manncorp MC series pick and place machines.

MODEL # MAX. NUMBER OF STICKS/TUBES VIBRATORY/GRAVITY FEED ZONES FEEDER BASE PORT POSITIONS OCCUPIED
KFTB-2 10 2 9
KFTB-4 20 4 17
  • Included as standard with all MC series pick and place machines
  • Position scanning for fast changeover
  • Automatic component quantity tracking
  • Quick-change feeder locations
  • Feeder position verification
  • Cut out manual data entry

Automatic Component Quantity Tracking

The software also tracks the number of components used, updating each feeder's memory module at the end of the production run with the quantity remaining on the reel (based on the number of pickups). This value, like the feeder ID, is retained with the feeder even after the feeder has been removed from the feeder base. When that feeder is loaded for new—or even a different—production run, the component quantity will be read from the smart feeder back into the assembly program so that an accurate component count can continue.

Feeder Position Verification

When using optimized feeder positions (a feature included in the MC series software), smart feeder IDs can be verified against feeder position data to ensure that the correct feeders are in the correct connector ports.

Position Scanning for Fast Changeover

When optimized feeder positions are not used, the system can automatically scan the loaded feeders for their IDs and inform the assembly program of each pick-up's feeder location.

Quick-Change Feeder Locations

If the operator, for whatever reason, has to position the smart feeders in a different arrangement on the machine or doesn't want to reposition smart feeders that are used in consecutive production runs, the Change Feeder Location Function can be used to import the new feeder ID data into the pick and place file.

Cut Out Manual Data Entry

An optional bar code reader can make quick work of reading and entering component data, including value, lot code, date code and starting quantity, directly from the reel or other packaging.

  • MC series pick and place machines feature large, open work areas that accept a variety of holders for trays and cut tape strips

TS-1 Tray Holder

TS-1 tray holder occupies approximately 13" x 5.5" (330 mm x 140 mm) of work area and is designed to hold a standard 12.4" x 5.35" (316 mm x 136 mm) JEDEC Matrix Tray or up to two cut strip tape holders. The TS-1 provides adjustability for a wide variety of smaller matrix tray and waffle pack combinations and can easily be modified for custom tray configurations.

CST Cut Strip Tape Holders for Short Lengths of Taped Components

CST Cut Strip Tape Holders are a handy accessory for presenting components that are supplied in short lengths of tape due to their low quantity of usage or to prevent the waste of components in sections of tape that are too short to be loaded into tape feeders. This photo shows standard holders for 8 mm, 12 mm, 16 mm and 24 mm tapes. Other sizes are available upon special request.

Inline options with conveyor and w/o waffle trays

Inline options with conveyor and with waffle trays

Batch Configurations w/o conveyor and w/o waffle trays

Batch Configurations w/o conveyor and with waffle trays

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

MC400 Automatic Pick & Place
  • PCBs to 415 x 320 mm
  • 3,000 CPH
  • Single Head
$53,995.00
MC385V1V SMT Pick & Place
  • PCBs to 435 x 350 mm
  • 5,000 CPH
  • Up to 128 Smart Feeder Ports
$63,995.00
MC385V2V Dual-Head Pick & Place
  • PCBs to 435 x 350 mm
  • 8,000 CPH
  • Up to 128 Smart Feeder Ports
$73,995.00
MC392 High Mix Pick & Place
  • 6,400 CPH, Dual Head
  • 600 x 350 mm PCB Capacity
  • Up to 160 Smart Feeder Ports
$83,995.00
MC388 SMT Pick & Place for High Mix High Component Count or LEDs
  • 10,500 CPH, Four Head
  • 1250 x 350 mm PCB Capacity
  • Up to 256 Smart Feeder Ports
$119,995.00
MC889 High Speed SMT Pick & Place
  • 20,000 CPH, Six Head, 22,000 CPH, Eight Head
  • 650 x 460 mm PCB Capacity
  • Up to 96 Smart Feeder Ports
from $145,995.00