AOI/SPI/PCB Inspection Conveyor
The AOI/SPI/PCB Inspection Conveyor automatically lifts up rejected (NG) PCBs for visual inspection or removal as they come out of an inline AOI or SPI machine while good PCBs pass through to the next process.
QUESTIONS? TEXT OR CALL
- Chris Ellis 215-869-8374
- EAST COAST
- Ed Stone 215-808-6266
- WEST COAST

AOI/SPI/PCB Inspection Conveyor BE100MW1 raises NG boards above the pass-through rails
When the AOI/SPI/PCB Inspection Conveyor receives an NG signal from an inline AOI or SPI system, it alerts the operator with a red light and alarm while raising the NG PCB above the conveyor rails so that good boards can continue to pass through underneath. If a second NG board is signaled before the operator clears the first, the conveyor will halt and alert the operator. Once the operator removes the first NG board and presses the RESET button, the conveyor resumes operation.
- PCB Size
- 50 mm x 50 mm to 450 mm x 350 mm wide
(1.97" x 1.97" to 15.75" x 13.78" wide) - PCB Direction
- Left to right (right to left optional)
- Transport Height
- 900 ±20 mm (35.4 ± 0.79")
- Fixed Side
- Front
- Main Motor Power
- 115 W
- Power Supply
- 110 VAC, 50/60 Hz
- Dimensions (L x W x H)
- 1000 mm x 650 mm x 900 +50/-20 mm
(40" x 26" x 35 +1.97"/-0.79") - Weight
- 95 kg (209 lbs)